If you look at the range of vape devices presented in online and offline vape stores, you can see that the most represented are sub-mods, which have confidently replaced the traditional box mods and tanks. Such popularity is explained very simply – sub-mods are much more compact than box mods, equipped with boards that are not worse, and at the same time immediately complete with a cartridge for the use of replaceable vaporizers or serviceable base. Among the large range of devices of this class, the dotMod dotAio is considered exemplary (in the opinion of many vapers), which has been a sales hit for almost two years. Naturally, during this time the device has become a bit outdated morally, so it is quite logical that the light saw dotMod dotAio V2 Pod Mod, which can be confidently prophesied success, as it has collected the best of the first version and added a lot of new features.
General data
dotMod dotAio V2 Pod Mod is a compact sub-mod designed to fit one 18650 battery, run by a proprietary multifunctional chip and designed to use proprietary vaporizers. The new pod mod is made in the traditional style of this series, a small box with rounded corners, a slightly protruding drip tip and a characteristic golden button with a monogram. new zealand vape shop dunedin The device is equipped with a performance chip, which is characterized by functionality and the ability to work with vaporizer resistances from 0.1 Ohm. The cartridge of the device is designed to install vaporizers of Coil Mesh 316L series, thanks to which you can get a good flavor and bulk. Buy dotMod dotAio V2 Pod Mod can be purchased in four colors black, red, blue and steel.
Kit
Despite the fact that the new device is released by such an eminent company, it is completed quite standard, so in the box the vaper will be able to discover:
The dotAio V2 Mod battery pack;
A dotAio Pod cartridge;
Two 510 drip tips;
USB Type-C cable;
Coil Mesh 316L” 0.3 ohm vaporizer;
Coil Mesh 316L” 0.7 ohm vaporizer;
User’s Manual.
dotAio V2 Mod Battery Pack
The dotMod company belongs to those companies that do not release their devices very often, but at the same time each device definitely becomes a hit in sales. As soon as vapers became very interested in sub-mods, the company released the dotAioV2 Mod, a device that has been considered one of the most popular and sought after by vapers for two years now. But two years in the world of vaping is a very long time, so it makes sense that such a device had to be updated, and the update happened dotMod dotAio V2 Pod Mod.
dotMod dotAio V2 is made in the same style as the first version -” a neat rectangular box with slightly rounded corners, and it is enough to just look at it, and it becomes clear WHAT this device is and WHO it is made by. The device is small 78*46*22.6 mm, and it weighs only 88 grams. The case is traditionally made of aluminum alloy and plastic.
The top end of the dotMod dotAio V2 is adorned with a 510 drip tip, and the kit comes with two of them, a low and a flattened one. If you want, you can always replace the drip tip with any one from your collection.
The dotMod dotAio V2 is powered by a traditional 18650 battery, which is installed under the magnetically held lid. If necessary, you can charge the battery using the USB Type-C connector located on the bottom end of the device with 2A of current.
An important feature of dotMod dotAio V2 is that it is equipped with a proprietary chipset, which is an order of magnitude more functional and productive than the chip used in the first edition. The power of the device is 5-75 watts, and the vaper will have at his disposal several modes auto (automatic power selection depending on the resistance of the vaporizer), varivatt, bypass and thermokontol. The minimum resistance of supported spirals is 0.1 ohms. For control in the device under the side cover, held by magnets, there are two buttons +/- and Fire button.
dotMod dotAio V2 is equipped with a small color display, on which the vaper will find a standard set of information about the device operation mode, battery charge level, power, voltage, vaporizer resistance and number of puffs. Depending on the vaper’s preferences, the color scheme of the display can be changed.
dotAio Pod Cartridge
The dotMod dotAio V2 uses a similar cartridge design, as in the first version it is installed under the second side panel, also held by magnets. It’s worth saying that the complete cartridge can be replaced with a serviceable base, but you’ll have to buy it additionally.
The dotAio V2 cartridge is designed to use replaceable Coil Mesh 316L vaporizers, which are slightly different from those used in the first version, with resistance of 0.3 and 0.7 ohms on the mesh.
A plus is that the cartridge has a blowing adjustment, realized with the help of an adapter, which is put on the vaporizer.
Refilling the cartridge is extremely simple, the side panel is removed, a small silicone plug is opened and 2.7 ml of liquid is poured into the tank.
Conclusions and impressions
The dotMod dotAio V2 Pod Mod is another worthy device that is sure to be a sales hit. We should give credit to the developers of the company, who did everything to make the second version not only not inferior to the first, but also superior to it. Every vaper who decides to buy dotMod dotAio V2 Pod Mod will get a versatile, stylish and productive device that can surprise even skeptical vapers with its characteristics.
Advantages and disadvantages
Disadvantages
In order to set the power and refill, you need to remove the side panels;
Small volume of the cartridge;
Advantages
Compact size;
Stylish design;
Replaceable 18650 battery;
Fast charging;
510 drip tip;
Performance chipset;
Good functionality;
Minimum supported resistance of 0.1 ohms;
Adjustable airflow;
Grid-mounted vaporizers.