Lately, the appearance of a new tank or drip, rather than a sub-mod or POD system is perceived almost as a holiday. If you look at it logically, it’s understandable that more and more vapers pay attention to the mod segment, because it’s more universal and practical. But this does not mean that vapers are not interested in traditional tanks, drips, box mods or squonks. When it became known about the presentation by Vandy Vape of their next brainchild under the mod Kylin M IAO, many were upset and mentally said And you Brut, but then came the unexpectedly good news presentation Berserker V2 MTL RTA! And let there be what skeptics say about how they bothered everybody with their Berserker, the new tank turned out to be very interesting and = continuator of one of the most popular series of MTL-atomizers.
General Data
Vandy Vape Berserker V2 MTL RTA is a small tankomizer, designed for a small volume of liquid, equipped with a variable blowing system to get the most accurate and tight cigarette puffs. The new tank looks very dignified and austere at the same time, and somewhat festive. The base is designed for installation of one coil, but the main attention the manufacturer paid to the blowing system, implemented by interchangeable jets and a number of pinholes in the base. You can buy Vandy Vape Berserker V2 MTL RTA in four colors: matte black, steel, gold and gun metal.
Kit
Here never vapers will be able to start berating Vandy Vape for the way it bundles its devices, and there will be no complaints to the new device as well, as the developers have provided it with everything you need for maximum comfortable use:
Berserker V2 MTL RTA Atomizer;
Two prewound nichrome Fused Clapton Coil with 0.74 ohms resistance;
Two additional 510’s drip tip;
Six interchangeable nozzles (one pre-installed);
Replacement screws;
Replacement O-rings;
Replacement ultem glass;
Spare overlay with standard threading holes;
Spare insulator;
Blue screwdriver;
User’s Manual.
Appearance and design
To say that the Vandy Vape Berserker V2 MTL RTA was created with the unwavering participation of Alex from VapersMD is not necessary, as all Berserkers are his brainchild. But you can’t say that’s a bad thing, as this particular series of tanks and tight cigarette draw drips has been one of the most popular for years, despite the fact that there are a lot of complaints about them. The new Vandy Vape Berserker V2 MTL RTA tank is designed with vapers in mind who know exactly what a true MTL puff should be.
The design of Vandy Vape Berserker V2 MTL RTA can not be called particularly pretentious, but also executed in the spirit of complete minimalism can not be called. It is made quite accurately, which can not fail to please, and at the same time its diameter is 24 mm, so it is logical to look on most box mods.
The volume of the tank flask is relatively small, only 3 ml, but it is quite a traditional volume for a cigarette maker. Depending on the preference of the vaper, you can use either standard glass or a tank of Ulteme. Separately, we would like to mention three complete 510-type sticks made in the form of pedestals of different height, and one of them is made of delrin and stainless steel.
Base, blowdown and usage features
Naturally, the most delicious thing about the Vandy Vape Berserker V2 MTL RTA is hidden under the top cap and dome, as many interesting and somewhat unconventional ideas are implemented in this version.
The base in this tank is designed to install one coil, and it is offset from the center and designed for horizontal installation parallel to the base. It is secured with two slotted screws. Space for laying the wool is quite enough, as the grooves in the base are large.
Blowing the coil is bottom, and it is designed so that the air flow fell directly on the coil, enveloping it all over the surface, so you can get a guaranteed positive taste.
If we talk about blowing Vandy Vape Berserker V2 MTL RTA, it is implemented in a very interesting way, as the vaper has six interchangeable plastic jets installed under the coil. And the holes in the jets are very different 0.8/1.0/1.4/1.6/2.0 mm and one of them with two 1.0 mm holes, so the vaper can pick up the Zen in the blow.
But the installation of jets does not end with the blowing in the tank at its base there is a rotating ring, with which you can choose the number of air intake holes from one to seven. This type of blowing is classic and in combination with the interchangeable jets it will allow you to choose the optimal puff.
The developers of the company led by Alex took a good decision regarding the fact that to equip the tank with the anti-pouring system. To do this you need to press the non return valve of the filling hole with a bottle spout when filling and if you don’t need such system you can always install the traditional version of the top cap with open holes.
Conclusions and impressions
The fact that Vandy Vape released not just an updated Berserker V2 MTL RTA but a really new tank is a big plus. Naturally, many vapers will have to spend more than one hour (day, week, month) in order to find the best blowing option for themselves, but he/she is happy. At the same time you can get a really tight puff, with good flavor and acceptable vapor temperature.
Advantages and disadvantages
Disadvantages
Small tank volume;
The 24mm diameter will not allow the tank to be used in small stealth gear.
Advantages
Strict and concise design;
Rich Kit;
Three Drip-Tips;
Leak protection (childproof);
Convenient installation of spirals;
Easy absorbent cotton packing;
Huge blowing options;
Full-value tight puff;
Excellent flavor transfer.