Apparently, dotMod specialists analyzed the market and realized that offering three or four even high-quality devices with original design and American production will not be able to hold the attention of vapers for a long time. As a result, in the last few months, new interesting devices have seen the light of day and immediately became sales hits. Considering that the company has not yet introduced a single tank or drip for a tight cigarette puff, it is not surprising that the next novelty is an MTL automizer. The dotMod dotMTL RTA is as recognizable a product of the company as its drips or tanks, but its main feature is a rather interesting air intake system and, of course, a tight cigarette puff.
General data
dotMod dotMTL RTA atomizer is a single coil atomizer with a slightly non-standard side point blowing, compact and with a number of characteristic design features. The vaper can choose a plastic or metal bulb to use in the atomizer, as the manufacturer offers both in the kit. new zealand vape shop One coil is installed in the tank, which is blown from the side, and the air intake is made from the bottom under the adjustment ring, so you will have to set the exact level of blowing only experimentally. You can buy dotMod dotMTL RTA in the company’s traditional colors of steel, black and gold.
Kit
Despite the fact that this product is from dotMod, the kitting is quite standard, and it is unlikely that it can surprise experienced vapers. Therefore, in the standard for many devices black box with a gold monogram can be found:
A dotMTL RTA atomizer with a pre-installed plastic tank and an Ultem drip tip;
A spare metal tank;
Spare delrin drip tip;
Screwdriver;
Spare pin;
A set of spare orings;
User’s Manual;
Certificate of Authenticity.
Appearance and design
You don’t need to be a super expert in the field of vaping to realize that dotMTL RTA was created in the laboratory (or some secret special division of the company) of dotMod. Although the company has not produced MTL tanks before, but the general style of the atomizer is very clear, the characteristic lines give away everything. And it is not at all necessary to find the brand logo, which is located on the dome of the vaporization chamber.
The diameter of dotMTL RTA is 22 mm, and with this the manufacturer clearly hints that the device 100% belongs to cigarette vaporizers. Some may not like it, but many fans of a tight cigarette puff will appreciate this solution.
The atomizer comes with two flasks plastic and metal flasks under the color of other elements. The metal one is more or less clear, it looks very stylish and unbreakable, but the decision to use plastic is a bit out of step with the company’s concept, but it is also unbreakable.
Special attention should be paid to the drip tip. The dotMod company has equipped this tank with another of its creations – branded threaded drip-types, which are fixed directly on the neck of the vaporization chamber. On the one hand it is good, as there will be no extraneous flavors and odors, but on the other hand there is no possibility to install your favorite types, for example, glendochaloks.
Base, airflow, and usage peculiarities
It is quite natural that dotMTL RTA is a single-coil tank, and, accordingly, it uses the same deck. The rack is one with horizontal spiral installation. This design is not a novelty, as many dotMod devices already used a single pressure screw with a ceramic plate. The screw is Phillips, but you can easily use a slotted screwdriver, and the installation process itself will not cause any questions, as it is extremely simple.
There are large enough grooves for the wool to be laid in which even a novice can lay it. The important point is to keep the length of the cotton ends precisely during the laying process.
The dotMTL RTA’s airflow is a bit unusual, but no less interesting. It is bottom-side with three holes of small diameter, directed directly to the coil. Such a solution will allow you to get a rather interesting flavor, maximizing it. The air intake is made directly under the lower adjustment ring and is not visible, although the adjustment ring is present. The manufacturer, as usual, decided to implement the airflow in his own way, and quite successfully at that.
Conclusions and impressions
dotMod dotMTL RTA is another worthy product from the world-famous American manufacturer, which 100% will find its buyer. Interesting design, ease of maintenance, original air intake system all this makes this tank somewhat different from analogs and original.
Advantages and disadvantages
Disadvantages
Difficulty in setting the airflow adjustment;
Non-standard drip tips;
The screwdriver slot is very shallow.
Advantages
Original recognizable design;
Decent kit;
Ease of maintenance;
Bottom-side point blowing;
Good flavor.