Today we will talk about a new product from Wismec and the already familiar designer Sinuous – a set of a clearomizer and a box mod called Sinuous FJ200.
As we know, the first fruit of the collaboration between the Chinese company Wismec and the designer with the pseudonym Sinuous was the Predator 228 box mod. The device turned out to be quite good, although it did not bring any fresh ideas to the vaping industry. However, due to a fairly large percentage of defects and not quite high-quality performance, the “Predator” received a flurry of criticism from users and did not have much popularity. Today we will look at a kind of continuation of the Predator 228 from the same manufacturer and the same designer, however, under a different name and with some other “chips”. Meet the Wismec Sinuous FJ200.
At first glance at the Sinuous FJ200, it is immediately clear who exactly put their hand to the design of the box mod. new zealand vape shop dunedin And it must be said that they put their hand very weakly, since the appearance of the device almost completely repeats the Predator 228, with the exception of a couple of minor features. In other words, Wismec cut corners.
Design of the Wismec Sinuous FJ200
Both in appearance and design, it is impossible to find many differences here. The main controls of the Sinuous FJ200 look and are in the same places as those of the Predator. There is no need to move the Fire button, disguised as a side panel. But what has really changed in our new product today is the maximum output power (now it is 200 watts) and power elements. The Sinuous FJ200 has a built-in 4600 mAh battery that supports charging with a current of up to 2A. Wismec claims to have some innovative and safe charging system that prevents excessive heating of the battery.
The “whale” version of the box mod is equipped with a new maintenance-free tank from Wismec called DIVIDER.
DIVIDER also works on new evaporators, of which there are only two types so far, one of which is designed for fairly modest vaping, and the second can already generate a decent amount of steam at a power of up to 120 watts.
An interesting feature of DIVIDER is the ability to change the volume of liquid. This is realized thanks to a special spacer, when installed, the useful capacity is simply displaced.
The tank has already received a proprietary filling system from Wismec with a sliding top cover. The manufacturer did not forget to equip his device with a tightening adjustment using a rotating ring at the bottom.
Returning to the Sinuous FJ200 box mod, I would like to note the correct location of the connector. The atomizers will be screwed strictly in the middle of the device and the maximum diameter that will fit here is 28 mm.
As already mentioned above, the Fire button in the Sinuous FJ200 is implemented in a similar way to the “Predator” and is hidden. To press the button, you just need to squeeze the device in your hand. An additional feature is the light indicator in the form of a separate LED.
Wismec Sinuous FJ200 Specifications:
Dimensions: 45mm*29mm*123.4mm
Weight: 264g
Capacity: 2ml/4ml
Operating modes: VW/TC-Ni/TC-Ti/TC-SS/TCR
Output power: 1—200W
Voltage: 0.5—9V
Output current: up to 50A
Resistance range: 0.05Ω—1.5Ω (TC)/0.1Ω—3.5Ω (VW)
Temperature range: 100°C—315°C/200°F—600°F
Charging current up to 2A
Battery capacity: 4600mAh