The traditional heating element of any atomizer for a long time was considered either replaceable vaporizers or coil (spirals), with both variants being approximately the same in their working principle / flavor / bulk. But not so long ago, manufacturers began to use a mesh with cells of different sizes as a heating element, made of the usual materials for the vaper – cantalum, nichrome or stainless steel. Immediately after the appearance of the first tanks and droppers on the mesh, vapers felt that the flavor transfer on it is better and more interesting, and the cloud of vapor is denser. Most manufacturers have at least one device working on the grid, but the companies-manufacturers do not stop, coming up with various innovations for fans of grid devices. One of the brightest examples is the company Hugsvape, which offers vapers its vision of the tank on the grid – Ring Lord Mesh RTA. The peculiarity of this atomizer is not in the fact that you can use only mesh on it, but in the fact that the design provides an original and non-standard blowing, which will allow you to maximize the flavor of the liquid and the bulk.
General Information
Hugsvape Ring Lord Mesh RTA serviced atomizer, designed to install a mesh heating element, which implements volumetric blowing due to the use of a special design of the air duct. The tank could be referred to as a classic one if it were not for the mesh heating element made of different materials and innovative blowing system. e-cigarettes online boutique in new zealand The arched design of the air duct allows for the most efficient directing of air flow directly to the mesh, which will ensure excellent flavor delivery and bulk. For now, Ring Lord Mesh RTA is only available in two colors black and steel, but other, brighter and more original color solutions are possible.
Equipment
We can not say that the company Hugsvape equipped its atomizer on the class of luxury, but it is worth paying tribute to the complete set is quite decent and practical. The vaper will find in the box:
A Ring Lord Mesh RTA atomizer with a 2ml regular glass pre-installed;
An extra 5 ml bubble glass;
Two grids with 0.13 ohm resistance;
Screwdriver wrench;
Replacement fingerings;
Replacement screws;
Cotton;
User’s Manual.
Appearance and design
One can talk a lot about modern trends in atomizer design, but the fact remains that nowadays a rare manufacturer decorates its tanks and drips with bright engravings and decorative elements. The developers of the company Hugsvape did not particularly deviate from tradition, so Ring Lord Mesh RTA is decorated rather modest, but stylish little engraving on the dome, notches on the top cap (they are executed as an ornament, but designed more for easy unscrewing) and on the ring blower. Despite the fact that the tank comes in just two colors, vapers will be happy with its appearance.
The Ring Lord Mesh RTA is made of stainless steel, so the tank does not weigh much. The seating diameter is 26mm, so it will look good on most modern box mods. The 810th drip-tip is non-ringing, made of delrin, but it is very easy to replace if you want. It’s worth paying tribute to the developers who provided for the use of two options of regular glass with 2.5 ml and bubble with 5 ml.
Base, blowing and features of use
Atomizers, which use mesh as a heating element, are not as many as it seems at first glance. This is primarily due to the fact that many vapers are not quite ready to use such heating elements. But those who have already tried the mesh remain happy with the flavor transfer and bulk. Hugsvape Ring Lord Mesh RTA is a classic version of a mesh powered device. Of course, you can try to install a small coil there, but there is no guarantee of a positive result.
The base is implemented by means of two clamping plates, which are fastened with slotted screws. The installation process itself is as simple as possible, but you should bend a section of the mesh under the correct radius for this it is recommended to use some round object like a screwdriver or drill bit. In order to lay the wool well and tightly, it is advisable to lay the wool first and only then fasten the mesh over it so that the maximum contact area between the mesh and the wool can be achieved.
Hugsvape Ring Lord Mesh RTA boasts a rather innovative blowing system. Above the mesh, a semi-circular hollow arch is installed inside with numerous small holes that, once installed, end up directly above the mesh. Both ends of the arch are inserted into special holes for air supply, which is taken from the bottom of the tank. This design allows the air flow to be directed as precisely as possible to the mesh, providing excellent flavor delivery and bulk.
Refilling Hugsvape Ring Lord Mesh RTA traditional top cap is unscrewed and you can safely pour liquid into two large enough holes.
Conclusions and impressions
We can confidently say, Hugsvape Ring Lord Mesh RTA is an interesting and a little bit unconventional atomizer, which will definitely appeal to fans of bright flavors that are revealed in a new way. The tank is quite easy to maintain and operate, and also has the significant advantage of good flavor delivery and bulk.
Advantages and disadvantages
Disadvantages
There is no provision for installing regular spirals, and installing it can damage the pressure plates;
The user will have to experiment with mesh radius for maximum flavor.
Advantages
Strict concise design;
Decent equipment;
Large volume of tank;
Easy to install the coil and absorbent cotton packing;
Excellent flavor transfer and bulk thanks to the arch top airing.